F48V4-NS Differential Controller (Long Range).
Only One Ethernet Port.
Can drive up to 32768 pixels. 48 Differential Outputs. Local SmartReceiver onboard. Can connect up to 12 Falcon Differential (Long Range) SmartReceiver Chains.
Board current specs
- 192 Universes of E131, Artnet or DDP.
- One Ethernet Port.
- Wireless ESP-07 Module with board mount antenna. Optional external antenna can be ordered.
- Falcon Player Remote Mode. The controller can store sequences on micro SD card and play in sync with FPP master.
- Single 4-Layer Board.
- Ability to drive 12 SmartReceiver chains.
Board can be powered from 5 or 7 - 13V, 3 amp minimum power supply.
Built-In local SmartReceiver. Ports 45-48A are the local SmartReceiver Ports.
Number of ports
All ports can use any of the 98,304 channels this controller can receive as a start address.
Each string can be independently configured for null nodes, zigzag, forward/reverse, node type, pixel count , grouping etc...
Pixels per port
1024 maximum per port when in 32 port mode. 704 maximum per port when in 48 port mode.
DMX and Renard Outputs
1 - Dedicated RS-485 output. 1 RJ-45 connector.
LCD Display,Push Buttons and Indicators
.96" OLED 128x64 matrix display for setup and status.
5 - Push buttons to control display. Up, Down, Right, Left and Select
Power LED indicator
Two multi purpose LEDS for status.
1 - Processor temperature sensor.
1 - Additional Sensor
Please note that the F48v4, unlikes the v3, has the option to run at 12v or 5v. When running at 12v, some of the components can get hot. Unless you are using the onboard pixel ports, it is advised that you run the F48 at 5v. If you do run at 12v it is advised that you add cooling/airflow to the enclosure.