Reference: SKU-PSK5MM
Brand: Build a Fright Show
Reference: SKU-PSK8MM
Brand: Build a Fright Show
Falcon PiCap V2
Can control four strings 800+ WS2811 pixels with fused and buffered outputs. Dedicated RS-485 DMX Output. Input voltage 5-24V. Real time clock (RTC). Completely Assembled. The PiCap V2 support PI B+, PI 2, PI 3, PI 4 and PI Zero. It does not support the PI B (Original). Supported by xLights.
This Raspberry Pi Cape should be mounted on a Raspberry Pi running Falcon Player (FPP). FPP is free open source software.
No customer reviews for the moment.
Reference: SKU-11919
Brand: Falcon & PixelController
48 Differential Outputs. Bi-Directional communication with all version 5 receivers connected in Smart Receiver Mode. The receivers report voltage, port current, firmware version, pixel counts and other useful information. Version 5 receivers can be updated over the wire. Can drive up to 32768 pixels from E131, DDP or Artnet (No restriction on the input...
Reference: SKU-BBBwithPSU
Brand: iLightThat
Reference: SKU-B17withBuildKit
Brand: iLightThat
Reference: SKU-3
Brand: Falcon & PixelController
Reference: SKU-257
Brand: BALS Essentials
Reference: SKU-BBBwithPSU
Brand: iLightThat
Reference: SKU-11919
Brand: Falcon & PixelController
48 Differential Outputs. Bi-Directional communication with all version 5 receivers connected in Smart Receiver Mode. The receivers report voltage, port current, firmware version, pixel counts and other useful information. Version 5 receivers can be updated over the wire. Can drive up to 32768 pixels from E131, DDP or Artnet (No restriction on the input...
