- There are no more items in your cart
- Shipping
- Total £0.00
Reference: SKU-BBBwithBuildKit
Brand: BALS Essentials
Baldrick 8 Port Controller with complete build kit
Reference: SKU-BBBwithPSU
Brand: BALS Essentials
Baldrick 8 Port Controller with PSU and Mount
The Build A Light Show 32 hole topper was designed in the UK by Greg Macaree and then manufactured locally.
Made from 4mm high quality steel at 25cms width.
The centre hole is 50mm diameter, and the outer holes to mount strips to are 6.6mm diameter.
Please note this is a bare topper - it is has not got the finish of the non raw/polished/painted versions. You will need to coat and protect the topper yourself, to the finish you desire.
Solid
This thing is absolutely solid.
Couple of useful things to know:
The slotted holes match up perfectly with 48mm scaffolding wall plate 131
The holes around the edge are M6. I intend to use stainless steel nuts, bolts and 18mm washers. The washers a big enough to clamp the pixel strip with the bolt going through the a pixel hole.
Just be aware that the raw steal will ruse very quickly even with the natural oils from your fingers, be ready to paint as soon as it arrives or expect to lightly sand it off.
Reference: SKU-193
Brand: BALS Essentials
BALS Gen 2 HDPE 12mm Megatree Mounting Strip | 100metres
Reference: SKU-109
Brand: BALS Essentials
BALS Gen 2 HDPE 12mm Megatree Mounting Strip | 50metres
Reference: SKU-61
Brand: BALS Essentials
BALS Gen 2 HDPE 12mm Megatree Mounting Strip | 200metres
Reference: SKU-193
Brand: BALS Essentials
BALS Gen 2 HDPE 12mm Megatree Mounting Strip | 100metres
Reference: SKU-INSTALLPACK
Brand: BALS Essentials
Installation Pack (Discounted bundle!)
-
Frequently purchased together
-
Products from the same category