FPP Pi Control Hat PiOLED

FPP Pi Control Hat PiOLED

** This is not a pixel controller, but a Hat that simply allows control of a Raspberry Pi running FPP  **

The Pi-OLED Hat is a board to easily allow mounting an OLED display onto a Raspberry Pi to display simple status information such as network IP address and player status.

It also provides push buttons that are used to access the FPP OLED menu system. From the menus, playlists can be started, various test modes activated, shutdown/restart, tethering options, etc are available with more to come in future versions of FPP.

The hat also provides a simple i2c temperature sensor for reading the current temperature in the mounting location.

Finally, the board provides two expansion headers. The first is a 1×4 female header that provides access to the I2C bus for additional I2C peripherals. The second is a 2×5 male header that is a direct mapping to the first 10 pins of the Raspberry Pi connector. It exposes the I2C bus as well as 3 GPIO pins that could be used to wire additional push buttons or other sensors or triggers. Since it is a direct mapping to the Pi header, any of the Pi I2C devices such as RTCs should work.

The price includes a blue/yellow OLED. We will be stocking other choices soon.
We would like to thanks Dan Kulp for helping us with bringing you this product - we urge all our customers to donate to the FPP project - you can find details here:
https://falconchristmas.com/forum/

Please note that this is not a pixel controlling PiHat. This is to allow you to control FPP at the Pi without logging into the web interface. If you want to control pixels, you need to look at the Falcon PiHat.